How to Fix F11 Error Code on Stove- [Here’s What to Do] 

There are no electronic appliances that don’t face an error once in their lifetime. Televisions, microwaves, refrigerators, washing machines, etc are prone to have particular errors. Therefore, the manufacturers have made a list of possible errors and signifed them with various error codes. Basically, an error code is a sequence of numbers or letters used to indicate a problem with an electronic device and displayed on the device’s display. 

Now back to the point, the F11 error code refers to a shorted key on the keypad or a key that has been pressed for too long. This error has a few relevant fixes to get fixed and we’re about to suggest them all. So, stick to the post till the end. 

Common Fixes for the F11 Error Code on Stove

First of all, you’ve to understand that the exact fixing of the F11 error can slightly vary depending on the specific model. But overall, the fixes are pretty mutual and effective for almost all appliances. When an F11 error occurs, the F11 ERR code will be displayed and all stove commands will be rejected. If this is the scenario in your case, first simply press the Cancel key to clear the code and check if the error persists. If so, try applying the following fixes until the error is fixed –

Fix 1: Power Cycle the Stove

It’s the traditional fixing method in this case. You need to disconnect the stove from the power source. So –

Step 1: Unplug the stove from the power outlet or switch off the circuit breaker. 

Step 2: Wait for at least 5 minutes.

Step 3: Replug the stove into the power source. 

Step 4: Check whether the error code appears within a minute. If not, it means the keypad is back to its normal state.

Fix 2: Reset the Keypad / Control Board

If your stove keypad comes with a Reset key, press it to reset the control board. It’ll be better to go with your stove’s user manual for specific instructions regarding the reset process. The simple reason is the process can vary by brand and model.

Fix 3: Clean the Keypad / Control Board

If the error still persists, you should try cleaning the control board. Maybe a dirty control board is to blame here. But remember, this method requires a person who is suitably handy for this job. So, if you don’t consider yourself suitable enough, you can seek professional assistance. Otherwise, follow the below-mentioned steps –

Step 1: Unplug the stove and remove the control board from the stove panel according to your specific model. You can make use of the manual. 

Step 2: Now, inspect the board’s touch membrane and check if there are any dirt, debris, dirt, or dark spots. If so, dip a cotton swab in rubbing alcohol and wipe the membrane gently so that all the obstacles get clean. 

Step 3: After that, reinstall the control board and restore the power. 

Fix 4: Replace the Keypad / Control Board

If all the previous fixes fail, there’s no other suitable fix but replacing the keypad membrane. Also, if replacing the membrane doesn’t do the job, you need to replace the entire control board. You can contact the manufacturer or get it from the nearby store. 

Conclusion

That’s all about fixing the F11 error code on a kitchen range or stove. Just for final clarification, the exact fixing can be slightly different based on the particular model but the main processes are the same. In most cases, the fix 1 or power cycle does the job pretty well. So, apply one by one and tell us which one fixes the error in your case.