LG ovens are pretty popular worldwide. These ovens have two parts: a lower oven and an upper oven, to make sure these ovens are functioning perfectly. There are several error codes to let you know if something is wrong. Error code f19 informs about the temperature that it did not go up to 150 degrees Fahrenheit in 5 minutes while the door was closed. It could be due to a faulty oven relay board, faulty oven sensor, or any other heating issues.
Different Types of Error Codes in an LG Oven | f19, f1, f4, and More
F1, F2/F4, F3, F4/F10, F5, F6/F8, F6, F7/F9/F11/F19 these are the main error code on every LG oven models. However, it can mean a little bit differently in different models. Code F1 means the stuck button or the temperature sensor is on. F2/F4 refers to the temperature sensor being short-circuited; in contrast, F3 refers to the touch button being short-circuited.
Furthermore, F4/F10 indicates the door lock malfunction, while F5 pops up for the control board failure. F6/F8 sends messages about the main power problem and, in some cases, while the oven is overheating. F7/F9/F11/F19 refers to oven heating issues, and it may not be heating up properly.
F7/F9/F11/F19 Error Code
This number covers a wide variety of heating issues, making it difficult to determine what is producing it. Despite the door being closed for five minutes, the temperature did not increase to 150 degrees Fahrenheit. Or it could be caused by a faulty oven relay board, a faulty oven sensor, or any other heating issue. Before attempting to repair the oven, make sure you restart it because this error code is sometimes all that is required.
To begin testing the oven detector, Cut the power and detach the sensor. Then perform an Ohms test; an effective sensor should have around 1,080 Ohms while at room temperature. If it is significantly higher or lower, the sensor must be replaced.
F1 Error Code
This code indicates a problem with a jammed switch on a control center or touchpad. It could also indicate a faulty connection between the oven’s touchpad and the control board. There is no easy way out of this. You can, however, try disconnecting the touchpad ribbon connection from the mainboard and cleaning it with an eraser. If that doesn’t work, get a replacement.
F2/F4 Error Code
An F2 error refers to the oven’s temperature sensor being broken or short-circuited. So, the Lg oven will not function effectively, and you will require the services of a technician to inspect the problem. The component may need a replacement or need to be repaired.
F3 Error Code
F3 indicates that a wire connected to the touch button is short-circuited. This problem could be caused by the control center buttons or wiring. If the problem persists after restarting your oven, you will have to call a repair service.
F4/F10 Error Code
This message means that the oven lock system is not working as it should be. You have the option of replacing the item yourself or hiring a specialist. When you want to start replacing it, make sure the oven is turned off.
Now, unscrew the rear panel and photograph the cabling on your smartphone; you may use it as a guideline to reconnect them correctly after you’re through. Then unplug all of the cables that are connected to the locking mechanism motor. It should be simple to remove the old door lock and replace it from there. If you don’t reconnect the cables correctly, you’ll have further issues with the oven.
F5 Error Code
It indicates an oven relay board problem. You should reset the oven by disconnecting it or removing power from it. Stay at least 40 seconds, then turn it back on.
F6/F8 Error Code
Code F6/F8 indicates that the circuit panel is not receiving enough power or is defective. You can tell which one it is by disconnecting the oven and waiting 10 minutes before turning it back on. Inspect the double breaker and ensure that both breakers are turned on; none are tripped. However, if the code displays again, it implies that the circuit panel has to be repaired or replaced.
How can I gain access to my LG stove?
The oven uses a temperature sensor to determine when it is cooled enough to open the door. If this sensor fails, the lock can become stuck indefinitely. The oven can be unlocked by resetting the sensor. To do this, turn off the oven and wait 5 minutes without reactivating it.
If it doesn’t help, start a fresh self-cleaning cycle and then terminate it after a few minutes. If the oven displays an error code, do not try to begin a new self-cleaning cycle. You can reach its door’s locking mechanism via the back access panel to manually release it. It will unlock the door and allow you to look inside the oven for further repairs.
Frequently Asked Question/FAQ
How can I restart my LG oven?
Locate the power switch first if you need to restart your LG oven. Turn off the breaker once you’ve located it. Wait one minute without turning it on. Turn the power back ON after one minute to reset.
How would one recalibrate the LG stove?
To recalibrate, set the oven’s thermostat in 5°F increments until you reach the desired cooking temperature. To adjust the thermostat, hit the options button repeatedly before AdJU appears. Enter the number you want to alter now. Toggle between + and – by pressing settings repeatedly. Then, to approve the change amount, push the start button.
Conclusion
Different types of Error code indicates different kind of error and every one of them has different fixes. Without the proper knowledge, it is better not to try fixing these by oneself and try seeking help from a professional in this field to avoid further problems that can be occurred to the LG oven as without proper knowledge it is hard to find out and fix the Error codes.
Leave a Reply